| Rope Diameter (mm) | Breaking Load Min. (kN) | Weight (kg/100M) |
| 8.0 | 30.48 | 21.7 |
| 10.0 | 47.20 | 33.6 |
| 12.0 | 71.00 | 50.6 |
| 13.0 | 81.90 | 58.2 |
| 16.0 | 128.20 | 87.2 |
| 16.0 | 122.30 | 87.2 |
| 16.0 | 144.40 | 87.2 |
-
For highest demands on breaking force, elongation and number of trips. Recommended for round grooves with an undercut angle of less than or equal to 85o -
For high demands on elongation also under difficult installation conditions. Recommended for all groove shapes.Rope Diameter (mm) Breaking Load Min. (kN) Weight (kg/100M) 8.0 42.7 26.9 10.0 68.0 42.8 12.0 96.8 60.9 13.0 114.1 71.8 16.0 174.9 110.1 -
For high demands on elongation and corrosion protection with special rope lubricationRope Diameter (mm) Breaking Load Min. (kN) Weight (kg/100M) 6.0 24.4 12.3 8.0 35.5 21.0 -
The commitment to improve elevator riding comfort resulted in the development of the elevator air conditioner. In line with the trend of the times, this highly automated cooling product truly improves the quality of elevator units in buildings. No water drop, Low noise compressor, Efficient and energy saving, environmentally friendly, Remote control operatedTK26Y / QZ Rated Cool Capacity (W) 2600 Air Flow (High/Low,m2/h) 430/340 Rated Cool Input Current (A) 4.3 Rated Cool Input Power (W) 950 Noise dB (A) <53 Voltage / Frequency 220-230V ~60Hz Refrigerant R410A Water Proof Level IPX4 Insulated Voltage Grade Grade 1 Compressor Protection Overheat Protection, Over Current Protection, Delay Startup Protection Control Mode Program Control (Automatic), Infared Remote Control (Manual) Dimensions 545*455*435 Weight (kg) 38.5 For Elevator (kg) <1350 -
The commitment to improve elevator riding comfort resulted in the development of the elevator air conditioner. In line with the trend of the times, this highly automated cooling product truly improves the quality of elevator units in buildings. No water drop, Low noise compressor, Efficient and energy saving, environmentally friendly, Remote control operatedTK35Y Rated Cool Capacity (W) 3500 Air Flow (High/Low,m2/h) 550/440 Rated Cool Input Current (A) 5.4 Rated Cool Input Power (W) 1220 Noise dB (A) <55 Voltage / Frequency 220-230V ~60Hz Refrigerant R410A Water Proof Level IPX4 Insulated Voltage Grade Grade 1 Compressor Protection Overheat Protection, Over Current Protection, Delay Startup Protection Control Mode Program Control (Automatic), Infared Remote Control (Manual) Dimensions 640*570*510 Weight (kg) 57 For Elevator (kg) >1350 -
-
- A true innovation in elevator door safeguarding, Memco Panachrome provides the elevator industry with a revolutionary detection system for maximum safety. This unique solution has red and green indicators which operate on door movement to visually show the opening and closing of the doors.
- Key Features:
- Red and Green Indicators highlight door movement to reduce door damage
- 2D and 3D detector models available
- Dense 154 infared beam pattern
- 4m pluggable extension cable
- Suitable for centre & side opening doors
- Available in 10mm and 43mm profile
-
- Incorporating Memco’s latest technology and designed with flexibility in mind, this elevator detection product range is highly versatile offering options from 16-40 diodes with beam patterns ranging from 74-194. It is able to detect a 50mm target obstacle at any point across the beam pattern right up until the doors close. It is available in different profile options to suit most elevator applications.
- EN81-20 Compliant
- Designed for new & existing installations
- Reduced installation time
- Diagnostic LEDs
- Auto Beam Disabling
- Extended range of input voltages 11-42V to suit all applications
- Incorporating Memco’s latest technology and designed with flexibility in mind, this elevator detection product range is highly versatile offering options from 16-40 diodes with beam patterns ranging from 74-194. It is able to detect a 50mm target obstacle at any point across the beam pattern right up until the doors close. It is available in different profile options to suit most elevator applications.
-
- Pana40 Plus is one of the most established products within the Memco range and is renowned for being an exceptionally high quality, reliable solution. It is available in 2D and 3D versions and operates via an external control unit which accepts voltages of 110/240VAC and 18-24VDC.
- EN81-20 Compliant
- 40 parallel or 194 criss-cross beams over protection to up to a height of 1.8m
- 3D detection provides extended protection into the landing
- Diagnostic LEDs
- Enhanced light immunity for installations exposed to bright light
- Pana40 Plus is one of the most established products within the Memco range and is renowned for being an exceptionally high quality, reliable solution. It is available in 2D and 3D versions and operates via an external control unit which accepts voltages of 110/240VAC and 18-24VDC.
-
- Main Component: Styrene Butadiene Rubber
- Better performance than natural rubber in the following areas – anti-high temperature, oil resistance, aging resistance, hardness stability after vulcanization, wear resistance
-
- Ingredients: Chlorosulphonated Polyethylene
- Highest performance protection – UV light, ozone concentration, high temperature, indirect exposure to sunlight, flame resistance
- Free release additives, clean and shiny surface with long durability
- Variety of colors available
-
- Designed to reduce the risk of entrapment incidents, Escalator Safety Strip Brush deflectors from Kleeneze-KOTI provide a tactile reminder to passengers to keep away from the hazard zones between the moving step and the stationery sidewall. Factory fitted to new escalators or retro-fitted as part of a general installation or modernisation programme, Escalator Safety Strip is installed on escalators in metros, airports, shopping malls and department stores worldwide.
- Key Features:
- Double Brush Protection
- Small Discreet Profile — 18mm
- Durable Aluminium Profile
- Easy to Install, Simple to Maintain
- Concealed Fixings
- Available in Silver or Black Finish
- Lightweight ABS Black End Caps
- Supplied in Easy to Hands 2400mm Lengths
- Suitable for both OEM & Modernization Projects
- Unique T-slot Feature for Easy Installation on Stepped Skirt Panels
- Complies with A17 (USA Code)
-
-
-
-
-
- The Automatic Step Cleaner allows for the cleaning of all visible surfaces of escalator steps using its 11 revolving brushes. Cleaning is carried out on the steps in their installed state and cleans both the risers and tread areas in a single operation. Escalators can be used again immediately after completing the cleaning process.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-